MEL-ROL LOW TEMP is a flexible, roll-type, waterproofing membrane, ideal for use in cold temperature applications. It is composed of a nominally 56-mil thick layer of polymeric waterproofing membrane formulated for maximum adhesion at lower temperatures on a heavy-duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures.
A handy overlap guideline is printed 2.5” (63.5 mm) in from the material edge on each side to assure proper overlap coverage and to assist in maintaining a straight application. Special exposed polymeric membrane strips are provided on both sides for positive membrane-to-membrane adhesion in the overlap area. The membrane strips are protected by a pull-off release strip. All components of MEL-ROL LOW TEMP work together to provide a cost-effective, positive waterproofing system that’s quick and easy to apply. W. R. MEADOWS accessory products included in the MEL-ROL LOW TEMP waterproofing system are BEM, MEL-ROL LIQUID MEMBRANE, MEL-PRIME adhesive, POINTING MASTIC, DETAIL STRIP, HYDRALASTIC 836, TERMINATION BAR, PROTECTION COURSE, and MEL-DRAIN™ drainage board.