Grout Pump GP-2HD
IDEAL FOR GROUTING METAL DOOR FRAMES
- Clevis stabilizer greatly extends diaphragm life and reduces pumping effort
- Hand operated; no electric or air power source needed
- Easy to operate, minimal maintenance required
- Pumps most types of cementitious grout (not for epoxy-type grouts)
- Makes an ideal tool for placing grout anywhere that high pressure is not required
- Lightweight and compact
Specifications Model GP-2HD:
| Model | Kenrich GP-2HD |
| Pump Type | Single Diaphragm, Self-Priming |
| Power Source | Hand Operated |
| *Output Capacity | 6 gallons/minute (48 cu. ft./hr) |
| Output Pressure | 0 to 15 psi |
| Hopper Capacity | .62 cubic foot (4.6 gallons) |
| Placement Hose Size | 1-1/2″ ID by 60″ long, Clear Vinyl |
| Discharge Head | 10 foot Vertical Lift |
| Dimensions | 23-1/2″ x 12″ x 23″ high |
| Net Weight | 21 pounds |
*Output and performance will vary depending on cycle rate, viscosity of the grout mixture and pressure conditions.
OPTIONS:
| Hose Reducer Kits | 3/4″ and 1″ ID Available |
| 1-1/2″ ID Hose Lengths: | 10 feet, 15 feet, and 20 feet |
| 1-1/2″ Hose Ends | Straight, 90 degree and 180 degree Elbows |
| Port Seal | Rubber, will fit 1-1/2″ Hose Ends |
| Handle | Vertical Actuator and Handle |
GP-2HD GP1 & GP2 Manuals Owner’s Manual PDF
