SuperTie™ CRFF 0750
SuperTie™ Coil Rod Form Fixture 3/4” offers an ultimate tensile strength of 30,000 pounds (15,000 pounds safe working load at 2:1 safety factor) and is most commonly used with the job-built (plywood and 2×4) forms and hand-set modular forms. The fiberglass rod diameter is 3/4” inch, making the system compatible with most commercial forming systems.
SuperTie™ Bearing Plate BP300
The bearing plate is a required component with the SuperTie Coil Rod Form Fixture. The BP300 is a 5”x5” steel plate with a 1 1/8” dia. hole and fits the 3/4”, & 1” Coil Rod.
Non-Corrosive Fiberglass Coil Rod
RJD Fiberglass Coil Rod (3/4”) utilizes a specially blended and formulated custom engineered resin, made in the USA, combining ultimate tensile strength and the RJD Form Fixture (CRFF) strength. Do not use any non RJD engineered Rod with RJD grippers which could result in form failure and/or injury. RJD Fiberglass Coil Rod will never rust, eliminating the need for breakback, plugging and patching allowing for superior architectural finishes.